Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part II: Applications to IM drives with diode front end

Yen Shin Lai; Po Sheng Chen; Hsiang Kuo Lee; John Chou

doi:10.1109/TIA.2004.836151

Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part II: Applications to IM drives with diode front end

Yen Shin Lai
, Po Sheng Chen
, Hsiang Kuo Lee
, John Chou

電機工程系

研究成果: 期刊貢獻 › 文章 › 同行評審

134 引文斯高帕斯（Scopus）

摘要

The main theme of this paper is to demonstrate the applications of the newly developed common-mode voltage reduction pulsewidth-modulation (PWM) technique, which restricts the common-mode voltage to one-third of DC-link voltage, to vector-controlled induction motor drives. As compared to previous common-mode voltage reduction techniques, the presented technique can be applied to the inverter with diode front end and has no adverse effect on the linear modulation range. Therefore, vector-controlled drives using the developed technique for inverter control have a wide speed range. Moreover, the effects of the common-mode voltage reduction PWM technique on speed response for vector-controlled induction motor drives will be fully investigated in this paper. It will be demonstrated by intensive experimental results that speed performance does not deteriorate significantly within the rated speed range.

原文	English
頁（從 - 到）	1613-1620
頁數	8
期刊	IEEE Transactions on Industry Applications
卷	40
發行號	6
DOIs	https://doi.org/10.1109/TIA.2004.836151
出版狀態	Published - 11月 2004

文獻附註

Funding Information:
Paper IPCSD-04-052, presented at the 2003 Industry Applications Society Annual Meeting, Salt Lake City, UT, October 12–16, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Industrial Drives Committee of the IEEE Industry Applications Society. Manuscript submitted for review November 1, 2003 and released for publication July 8, 2004. This work was supported by the National Science Council (NSC), Taiwan, R.O.C.

存取文件

10.1109/TIA.2004.836151

其它文件與鏈接

Link to publication in Scopus

引用此

@article{6958b2c600534b2789a5b3dfdc62c3dd,

title = "Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part II: Applications to IM drives with diode front end",

abstract = "The main theme of this paper is to demonstrate the applications of the newly developed common-mode voltage reduction pulsewidth-modulation (PWM) technique, which restricts the common-mode voltage to one-third of DC-link voltage, to vector-controlled induction motor drives. As compared to previous common-mode voltage reduction techniques, the presented technique can be applied to the inverter with diode front end and has no adverse effect on the linear modulation range. Therefore, vector-controlled drives using the developed technique for inverter control have a wide speed range. Moreover, the effects of the common-mode voltage reduction PWM technique on speed response for vector-controlled induction motor drives will be fully investigated in this paper. It will be demonstrated by intensive experimental results that speed performance does not deteriorate significantly within the rated speed range.",

keywords = "Common-mode voltage, Induction motor drives, Pulsewidth modulation (PWM), Space-vector modulation, Vector control",

author = "Lai, \{Yen Shin\} and Chen, \{Po Sheng\} and Lee, \{Hsiang Kuo\} and John Chou",

note = "Funding Information: Paper IPCSD-04-052, presented at the 2003 Industry Applications Society Annual Meeting, Salt Lake City, UT, October 12–16, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Industrial Drives Committee of the IEEE Industry Applications Society. Manuscript submitted for review November 1, 2003 and released for publication July 8, 2004. This work was supported by the National Science Council (NSC), Taiwan, R.O.C.",

year = "2004",

month = nov,

doi = "10.1109/TIA.2004.836151",

language = "???core.languages.en\_GB???",

volume = "40",

pages = "1613--1620",

journal = "IEEE Transactions on Industry Applications",

issn = "0093-9994",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "6",

}

Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part II: Applications to IM drives with diode front end. / Lai, Yen Shin; Chen, Po Sheng; Lee, Hsiang Kuo 等.
於: IEEE Transactions on Industry Applications, 卷 40, 編號 6, 11.2004, p. 1613-1620.

研究成果: 期刊貢獻 › 文章 › 同行評審

TY - JOUR

T1 - Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part II

T2 - Applications to IM drives with diode front end

AU - Lai, Yen Shin

AU - Chen, Po Sheng

AU - Lee, Hsiang Kuo

AU - Chou, John

N1 - Funding Information: Paper IPCSD-04-052, presented at the 2003 Industry Applications Society Annual Meeting, Salt Lake City, UT, October 12–16, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Industrial Drives Committee of the IEEE Industry Applications Society. Manuscript submitted for review November 1, 2003 and released for publication July 8, 2004. This work was supported by the National Science Council (NSC), Taiwan, R.O.C.

PY - 2004/11

Y1 - 2004/11

N2 - The main theme of this paper is to demonstrate the applications of the newly developed common-mode voltage reduction pulsewidth-modulation (PWM) technique, which restricts the common-mode voltage to one-third of DC-link voltage, to vector-controlled induction motor drives. As compared to previous common-mode voltage reduction techniques, the presented technique can be applied to the inverter with diode front end and has no adverse effect on the linear modulation range. Therefore, vector-controlled drives using the developed technique for inverter control have a wide speed range. Moreover, the effects of the common-mode voltage reduction PWM technique on speed response for vector-controlled induction motor drives will be fully investigated in this paper. It will be demonstrated by intensive experimental results that speed performance does not deteriorate significantly within the rated speed range.

AB - The main theme of this paper is to demonstrate the applications of the newly developed common-mode voltage reduction pulsewidth-modulation (PWM) technique, which restricts the common-mode voltage to one-third of DC-link voltage, to vector-controlled induction motor drives. As compared to previous common-mode voltage reduction techniques, the presented technique can be applied to the inverter with diode front end and has no adverse effect on the linear modulation range. Therefore, vector-controlled drives using the developed technique for inverter control have a wide speed range. Moreover, the effects of the common-mode voltage reduction PWM technique on speed response for vector-controlled induction motor drives will be fully investigated in this paper. It will be demonstrated by intensive experimental results that speed performance does not deteriorate significantly within the rated speed range.

KW - Common-mode voltage

KW - Induction motor drives

KW - Pulsewidth modulation (PWM)

KW - Space-vector modulation

KW - Vector control

UR - https://www.scopus.com/pages/publications/10244259135

U2 - 10.1109/TIA.2004.836151

DO - 10.1109/TIA.2004.836151

M3 - ???researchoutput.researchoutputtypes.contributiontojournal.article???

AN - SCOPUS:10244259135

SN - 0093-9994

VL - 40

SP - 1613

EP - 1620

JO - IEEE Transactions on Industry Applications

JF - IEEE Transactions on Industry Applications

IS - 6

ER -

Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-Part II: Applications to IM drives with diode front end

摘要

文獻附註

存取文件

其它文件與鏈接

指紋

引用此