@inproceedings{12fabedfd7f04abb9c1966345061abaa,
title = "A study on the pushover test and numerical analysis of GFRP frame with metal joints",
abstract = "The mechanical behavior of GFRP frame made by assembling GFRP components with metal joints and fastening them with metal bolts was proposed in this paper. A total of six specimens were used, and these were divided into single-span and double-span frames. The single-span specimens include a prototype specimen, a tension-braced specimen and a compression-braced specimen. The double-span specimens also include a prototype specimen, a tension-compression-braced specimen and a compression-tension-braced specimen. A pushover experiment was performed on the specimens and numerical simulation was done using SAP2000. It was concluded that the frame with bracing can increase the stiffness and ultimate strength; and the analysis results when compared with the experimental results have an absolute error less than 4 \%, showing correlation..",
author = "Li, \{Yeou Fong\} and Lai, \{Jian Yu\} and Ousman Jobe",
year = "2014",
language = "???core.languages.en\_GB???",
series = "Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014",
publisher = "International Institute for FRP in Construction (IIFC)",
editor = "Raafat El-Hacha",
booktitle = "Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014",
note = "7th International Conference on FRP Composites in Civil Engineering, CICE 2014 ; Conference date: 20-08-2014 Through 22-08-2014",
}