The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method

Kuo Hsiung Tseng; Yu Hung Lin; Der Chi Tien; Meng Yun Chung

doi:10.1109/ICIEA.2018.8397746

The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method

Kuo Hsiung Tseng
, Yu Hung Lin
, Der Chi Tien
, Meng Yun Chung

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

This paper uses Electrical Discharge Machining (EDM), Submerged Arc Discharge Method (SADM), and arc concentrated energy to ionize the medium of DI water. During submerged arc discharge, the silver metal surface melts and is condensed into a metal fluid containing Nano and Sub-micron particles by DI water after high temperature vaporization. There is no chemical byproduct produced in the process, and it is characterized by a simple and rapid process and green preparation. The procedure of this study runs as follows: (1) 200ml DI water is prepared as dielectric fluid; during submerged arc discharge, the electrode silver bar is molten in this dielectric fluid to prepare the Nano-Ag colloid; (2) 150ml DI water containing 5ml Nh3 is used as a dielectric fluid; the electrode silver bar is molten by a submerged arc discharge in this dielectric fluid to prepare the Nano-Ag colloid (Nh3-Ag) to be different from the former one. The two kinds of Nano-Ag colloid are analyzed by a UV-Vis spectrum analyzer and Zetasizer so as to work out the relationship between the surface plasmon resonance generated wavelength and absorbance. The Nano-Ag colloid derived from Nh3-Ag is compared with the Nano-Ag colloid derived from Ag. The Nh3-Ag particles have good stability, and the concentration and Zeta potential are increased.

Original language	English
Title of host publication	Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	379-383
Number of pages	5
ISBN (Electronic)	9781538637579
DOIs	https://doi.org/10.1109/ICIEA.2018.8397746
State	Published - 26 Jun 2018
Event	13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018 - Wuhan, China Duration: 31 May 2018 → 2 Jun 2018

Publication series

Name	Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018

Conference

Conference	13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018
Country/Territory	China
City	Wuhan
Period	31/05/18 → 2/06/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Ag
Nano-Ag colloid
Nh3
Submerged Arc Discharge Method
magnetic stirring

Access to Document

10.1109/ICIEA.2018.8397746

Cite this

Tseng, K. H., Lin, Y. H., Tien, D. C., & Chung, M. Y. (2018). The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method. In Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018 (pp. 379-383). (Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICIEA.2018.8397746

Tseng, Kuo Hsiung ; Lin, Yu Hung ; Tien, Der Chi et al. / The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method. Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 379-383 (Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018).

@inproceedings{afd9e0efb7a84633895889b1b71b5e9b,

title = "The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method",

abstract = "This paper uses Electrical Discharge Machining (EDM), Submerged Arc Discharge Method (SADM), and arc concentrated energy to ionize the medium of DI water. During submerged arc discharge, the silver metal surface melts and is condensed into a metal fluid containing Nano and Sub-micron particles by DI water after high temperature vaporization. There is no chemical byproduct produced in the process, and it is characterized by a simple and rapid process and green preparation. The procedure of this study runs as follows: (1) 200ml DI water is prepared as dielectric fluid; during submerged arc discharge, the electrode silver bar is molten in this dielectric fluid to prepare the Nano-Ag colloid; (2) 150ml DI water containing 5ml Nh3 is used as a dielectric fluid; the electrode silver bar is molten by a submerged arc discharge in this dielectric fluid to prepare the Nano-Ag colloid (Nh3-Ag) to be different from the former one. The two kinds of Nano-Ag colloid are analyzed by a UV-Vis spectrum analyzer and Zetasizer so as to work out the relationship between the surface plasmon resonance generated wavelength and absorbance. The Nano-Ag colloid derived from Nh3-Ag is compared with the Nano-Ag colloid derived from Ag. The Nh3-Ag particles have good stability, and the concentration and Zeta potential are increased.",

keywords = "Ag, Nano-Ag colloid, Nh3, Submerged Arc Discharge Method, magnetic stirring",

author = "Tseng, \{Kuo Hsiung\} and Lin, \{Yu Hung\} and Tien, \{Der Chi\} and Chung, \{Meng Yun\}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018 ; Conference date: 31-05-2018 Through 02-06-2018",

year = "2018",

month = jun,

day = "26",

doi = "10.1109/ICIEA.2018.8397746",

language = "???core.languages.en\_GB???",

series = "Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "379--383",

booktitle = "Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018",

}

Tseng, KH, Lin, YH, Tien, DC & Chung, MY 2018, The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method. in Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018. Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018, Institute of Electrical and Electronics Engineers Inc., pp. 379-383, 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018, Wuhan, China, 31/05/18. https://doi.org/10.1109/ICIEA.2018.8397746

The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method. / Tseng, Kuo Hsiung; Lin, Yu Hung; Tien, Der Chi et al.
Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 379-383 (Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method

AU - Tseng, Kuo Hsiung

AU - Lin, Yu Hung

AU - Tien, Der Chi

AU - Chung, Meng Yun

PY - 2018/6/26

Y1 - 2018/6/26

N2 - This paper uses Electrical Discharge Machining (EDM), Submerged Arc Discharge Method (SADM), and arc concentrated energy to ionize the medium of DI water. During submerged arc discharge, the silver metal surface melts and is condensed into a metal fluid containing Nano and Sub-micron particles by DI water after high temperature vaporization. There is no chemical byproduct produced in the process, and it is characterized by a simple and rapid process and green preparation. The procedure of this study runs as follows: (1) 200ml DI water is prepared as dielectric fluid; during submerged arc discharge, the electrode silver bar is molten in this dielectric fluid to prepare the Nano-Ag colloid; (2) 150ml DI water containing 5ml Nh3 is used as a dielectric fluid; the electrode silver bar is molten by a submerged arc discharge in this dielectric fluid to prepare the Nano-Ag colloid (Nh3-Ag) to be different from the former one. The two kinds of Nano-Ag colloid are analyzed by a UV-Vis spectrum analyzer and Zetasizer so as to work out the relationship between the surface plasmon resonance generated wavelength and absorbance. The Nano-Ag colloid derived from Nh3-Ag is compared with the Nano-Ag colloid derived from Ag. The Nh3-Ag particles have good stability, and the concentration and Zeta potential are increased.

AB - This paper uses Electrical Discharge Machining (EDM), Submerged Arc Discharge Method (SADM), and arc concentrated energy to ionize the medium of DI water. During submerged arc discharge, the silver metal surface melts and is condensed into a metal fluid containing Nano and Sub-micron particles by DI water after high temperature vaporization. There is no chemical byproduct produced in the process, and it is characterized by a simple and rapid process and green preparation. The procedure of this study runs as follows: (1) 200ml DI water is prepared as dielectric fluid; during submerged arc discharge, the electrode silver bar is molten in this dielectric fluid to prepare the Nano-Ag colloid; (2) 150ml DI water containing 5ml Nh3 is used as a dielectric fluid; the electrode silver bar is molten by a submerged arc discharge in this dielectric fluid to prepare the Nano-Ag colloid (Nh3-Ag) to be different from the former one. The two kinds of Nano-Ag colloid are analyzed by a UV-Vis spectrum analyzer and Zetasizer so as to work out the relationship between the surface plasmon resonance generated wavelength and absorbance. The Nano-Ag colloid derived from Nh3-Ag is compared with the Nano-Ag colloid derived from Ag. The Nh3-Ag particles have good stability, and the concentration and Zeta potential are increased.

KW - Ag

KW - Nano-Ag colloid

KW - Nh3

KW - Submerged Arc Discharge Method

KW - magnetic stirring

UR - https://www.scopus.com/pages/publications/85050164598

U2 - 10.1109/ICIEA.2018.8397746

DO - 10.1109/ICIEA.2018.8397746

M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???

AN - SCOPUS:85050164598

T3 - Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018

SP - 379

EP - 383

BT - Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018

Y2 - 31 May 2018 through 2 June 2018

ER -

Tseng KH, Lin YH, Tien DC, Chung MY. The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method. In Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 379-383. (Proceedings of the 13th IEEE Conference on Industrial Electronics and Applications, ICIEA 2018). doi: 10.1109/ICIEA.2018.8397746

The study of nanosilver colloid with/without ammonia prepare by Submerged Arc Discharge Method

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this