Sonochemical synthesis and anchoring of zinc oxide on hemin-mediated multiwalled carbon nanotubes-cellulose nanocomposite for ultra-sensitive biosensing of H₂O₂

In this work, the metal oxide and biopolymer nanocomposites on multiwalled carbon nanotubes (MWCNT) were prepared using a simple sonochemical method. The hexagonal nanorods of zinc oxide (ZnO NR) were synthesized by probe sonication (frequency = 20 kHz, amplitude = 50) method and were integrated on ultrasonically functionalized MWCNT-cellulose nanocrystals (MWCNT-CNC) for the first time. The stable hemin bio-composites also were prepared using the bath sonication (37 kHz of frequency, 150 W of power) method, and was used for the selective and ultrasensitive electrochemical detection of H₂O₂. The UV–Vis spectroscopy studies confirmed the presence of native hemin on MWCNT-CNC/ZnO NR nanocomposite. Cyclic voltammetry studies revealed that an enhanced redox electrochemical behaviour of hemin was observed on hemin immobilised MWCNT-CNC/ZnO NR nanocomposite than that of other hemin modified electrodes. Also, the MWCNT-CNC/ZnO NR/hemin modified SPCE showed 2.3 folds higher electrocatalytic activity with a lower reduction potential (−0.2 V) towards H₂O₂ than that of other investigated hemin modified electrodes including hemin/MWCNT and hemin/CNC-ZnO. The fabricated biosensor displayed a stable amperometric response (-0.2 V vs Ag/AgCl) in the linear concentration of H₂O₂ ranging up to 4183.3 µM with a lower detection limit of 4.0 nM.