Real-time diagnosis for micro powder injection molding using ultrasound

C. C. Cheng; Y. Ono; B. D. Whiteside; E. C. Brown; C. K. Jen; P. D. Coates

Real-time diagnosis for micro powder injection molding using ultrasound

C. C. Cheng
, Y. Ono
, B. D. Whiteside
, E. C. Brown
, C. K. Jen
, P. D. Coates

Department of Energy and Refrigerating Air-Conditioning Engineering

Research output: Contribution to conference › Paper › peer-review

Abstract

Real-time diagnostics of ceramic powder injection molding with a micromolding machine was performed using ultrasound. Miniature ultrasonic sensors were integrated onto the mold insert. Melt front, solidification and part detachment of the feedstock inside the mold cavity were observed. The assistance of ultrasonic velocity in feedstock inside the mold cavity, the ultrasonic contact time during which the part and mold are in contact and holding pressure may minimize part dimension variation.

Original language	English
Pages	2531-2535
Number of pages	5
State	Published - 2006
Event	Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006 - Charlotte, NC, United States Duration: 7 May 2006 → 11 May 2006

Conference

Conference	Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006
Country/Territory	United States
City	Charlotte, NC
Period	7/05/06 → 11/05/06

Cite this

@conference{f9a969103f294ad3b51be28d9f346460,

title = "Real-time diagnosis for micro powder injection molding using ultrasound",

abstract = "Real-time diagnostics of ceramic powder injection molding with a micromolding machine was performed using ultrasound. Miniature ultrasonic sensors were integrated onto the mold insert. Melt front, solidification and part detachment of the feedstock inside the mold cavity were observed. The assistance of ultrasonic velocity in feedstock inside the mold cavity, the ultrasonic contact time during which the part and mold are in contact and holding pressure may minimize part dimension variation.",

author = "Cheng, \{C. C.\} and Y. Ono and Whiteside, \{B. D.\} and Brown, \{E. C.\} and Jen, \{C. K.\} and Coates, \{P. D.\}",

year = "2006",

language = "???core.languages.en\_GB???",

pages = "2531--2535",

note = "Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006 ; Conference date: 07-05-2006 Through 11-05-2006",

}

TY - CONF

T1 - Real-time diagnosis for micro powder injection molding using ultrasound

AU - Cheng, C. C.

AU - Ono, Y.

AU - Whiteside, B. D.

AU - Brown, E. C.

AU - Jen, C. K.

AU - Coates, P. D.

PY - 2006

Y1 - 2006

N2 - Real-time diagnostics of ceramic powder injection molding with a micromolding machine was performed using ultrasound. Miniature ultrasonic sensors were integrated onto the mold insert. Melt front, solidification and part detachment of the feedstock inside the mold cavity were observed. The assistance of ultrasonic velocity in feedstock inside the mold cavity, the ultrasonic contact time during which the part and mold are in contact and holding pressure may minimize part dimension variation.

AB - Real-time diagnostics of ceramic powder injection molding with a micromolding machine was performed using ultrasound. Miniature ultrasonic sensors were integrated onto the mold insert. Melt front, solidification and part detachment of the feedstock inside the mold cavity were observed. The assistance of ultrasonic velocity in feedstock inside the mold cavity, the ultrasonic contact time during which the part and mold are in contact and holding pressure may minimize part dimension variation.

UR - https://www.scopus.com/pages/publications/33745632401

M3 - ???researchoutput.researchoutputtypes.contributiontoconference.paper???

AN - SCOPUS:33745632401

SP - 2531

EP - 2535

T2 - Society of Plastics Engineers Annual Technical Conference 2006, ANTEC 2006

Y2 - 7 May 2006 through 11 May 2006

ER -

Real-time diagnosis for micro powder injection molding using ultrasound

Abstract

Conference

Other files and links

Fingerprint

Cite this