Online surface characterization of Ni/diamond sawing wire based on machine vision

Xuan Yang Zheng; Chao Ching Ho

doi:10.1109/ICASI.2018.8394291

Online surface characterization of Ni/diamond sawing wire based on machine vision

Xuan Yang Zheng
, Chao Ching Ho

Graduate Institute of Manufacturing Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

The Surface inspection of Ni/diamond composite coating is important for high quality electrodeposited Ni-diamond wires. Ni-coated diamond abrasive wire saw are used widely for cutting hard and brittle materials effectively Diamond abrasives deposited density and uniformed distribution on sawing wire surface are the key factors for sawing efficiency. The phenomenon of abrasives aggregation is also important factor in cutting quality. In this study, we have developed a machine vision based inspection system for measuring the profile and defect of abrasives coated on wire saw surface. In this configuration, the proposed detection algorithm can calculate the amount of single and group abrasives precisely. The 2D dimension of the wire saw are also measured, and the defect of abrasives coated are detected simultaneously during the electrodeposited process. The analyzed result is beneficial to the electrodeposited process to adjusting the plating parameters and the concentration of diamond particles in the plating bath timely.

Original language	English
Title of host publication	Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018
Editors	Artde Donald Kin-Tak Lam, Stephen D. Prior, Teen-Hang Meen
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	484-486
Number of pages	3
ISBN (Electronic)	9781538643426
DOIs	https://doi.org/10.1109/ICASI.2018.8394291
State	Published - 22 Jun 2018
Event	4th IEEE International Conference on Applied System Innovation, ICASI 2018 - Chiba, Japan Duration: 13 Apr 2018 → 17 Apr 2018

Publication series

Name	Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018

Conference

Conference	4th IEEE International Conference on Applied System Innovation, ICASI 2018
Country/Territory	Japan
City	Chiba
Period	13/04/18 → 17/04/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

Keywords

Ni/diamond electrodeposited sawing wire
defect of abrasives
machine vison

Access to Document

10.1109/ICASI.2018.8394291

Cite this

Zheng, X. Y., & Ho, C. C. (2018). Online surface characterization of Ni/diamond sawing wire based on machine vision. In A. D. K.-T. Lam, S. D. Prior, & T.-H. Meen (Eds.), Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018 (pp. 484-486). (Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICASI.2018.8394291

Zheng, Xuan Yang ; Ho, Chao Ching. / Online surface characterization of Ni/diamond sawing wire based on machine vision. Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018. editor / Artde Donald Kin-Tak Lam ; Stephen D. Prior ; Teen-Hang Meen. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 484-486 (Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018).

@inproceedings{2588dbc41ec747daae5a7a5eeff623a0,

title = "Online surface characterization of Ni/diamond sawing wire based on machine vision",

abstract = "The Surface inspection of Ni/diamond composite coating is important for high quality electrodeposited Ni-diamond wires. Ni-coated diamond abrasive wire saw are used widely for cutting hard and brittle materials effectively Diamond abrasives deposited density and uniformed distribution on sawing wire surface are the key factors for sawing efficiency. The phenomenon of abrasives aggregation is also important factor in cutting quality. In this study, we have developed a machine vision based inspection system for measuring the profile and defect of abrasives coated on wire saw surface. In this configuration, the proposed detection algorithm can calculate the amount of single and group abrasives precisely. The 2D dimension of the wire saw are also measured, and the defect of abrasives coated are detected simultaneously during the electrodeposited process. The analyzed result is beneficial to the electrodeposited process to adjusting the plating parameters and the concentration of diamond particles in the plating bath timely.",

keywords = "Ni/diamond electrodeposited sawing wire, defect of abrasives, machine vison",

author = "Zheng, \{Xuan Yang\} and Ho, \{Chao Ching\}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 4th IEEE International Conference on Applied System Innovation, ICASI 2018 ; Conference date: 13-04-2018 Through 17-04-2018",

year = "2018",

month = jun,

day = "22",

doi = "10.1109/ICASI.2018.8394291",

language = "???core.languages.en\_GB???",

series = "Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "484--486",

editor = "Lam, \{Artde Donald Kin-Tak\} and Prior, \{Stephen D.\} and Teen-Hang Meen",

booktitle = "Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018",

}

Zheng, XY & Ho, CC 2018, Online surface characterization of Ni/diamond sawing wire based on machine vision. in ADK-T Lam, SD Prior & T-H Meen (eds), Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018. Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018, Institute of Electrical and Electronics Engineers Inc., pp. 484-486, 4th IEEE International Conference on Applied System Innovation, ICASI 2018, Chiba, Japan, 13/04/18. https://doi.org/10.1109/ICASI.2018.8394291

Online surface characterization of Ni/diamond sawing wire based on machine vision. / Zheng, Xuan Yang; Ho, Chao Ching.
Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018. ed. / Artde Donald Kin-Tak Lam; Stephen D. Prior; Teen-Hang Meen. Institute of Electrical and Electronics Engineers Inc., 2018. p. 484-486 (Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Online surface characterization of Ni/diamond sawing wire based on machine vision

AU - Zheng, Xuan Yang

AU - Ho, Chao Ching

PY - 2018/6/22

Y1 - 2018/6/22

N2 - The Surface inspection of Ni/diamond composite coating is important for high quality electrodeposited Ni-diamond wires. Ni-coated diamond abrasive wire saw are used widely for cutting hard and brittle materials effectively Diamond abrasives deposited density and uniformed distribution on sawing wire surface are the key factors for sawing efficiency. The phenomenon of abrasives aggregation is also important factor in cutting quality. In this study, we have developed a machine vision based inspection system for measuring the profile and defect of abrasives coated on wire saw surface. In this configuration, the proposed detection algorithm can calculate the amount of single and group abrasives precisely. The 2D dimension of the wire saw are also measured, and the defect of abrasives coated are detected simultaneously during the electrodeposited process. The analyzed result is beneficial to the electrodeposited process to adjusting the plating parameters and the concentration of diamond particles in the plating bath timely.

AB - The Surface inspection of Ni/diamond composite coating is important for high quality electrodeposited Ni-diamond wires. Ni-coated diamond abrasive wire saw are used widely for cutting hard and brittle materials effectively Diamond abrasives deposited density and uniformed distribution on sawing wire surface are the key factors for sawing efficiency. The phenomenon of abrasives aggregation is also important factor in cutting quality. In this study, we have developed a machine vision based inspection system for measuring the profile and defect of abrasives coated on wire saw surface. In this configuration, the proposed detection algorithm can calculate the amount of single and group abrasives precisely. The 2D dimension of the wire saw are also measured, and the defect of abrasives coated are detected simultaneously during the electrodeposited process. The analyzed result is beneficial to the electrodeposited process to adjusting the plating parameters and the concentration of diamond particles in the plating bath timely.

KW - Ni/diamond electrodeposited sawing wire

KW - defect of abrasives

KW - machine vison

UR - https://www.scopus.com/pages/publications/85050319394

U2 - 10.1109/ICASI.2018.8394291

DO - 10.1109/ICASI.2018.8394291

M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???

AN - SCOPUS:85050319394

T3 - Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018

SP - 484

EP - 486

BT - Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018

A2 - Lam, Artde Donald Kin-Tak

A2 - Prior, Stephen D.

A2 - Meen, Teen-Hang

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 4th IEEE International Conference on Applied System Innovation, ICASI 2018

Y2 - 13 April 2018 through 17 April 2018

ER -

Zheng XY, Ho CC. Online surface characterization of Ni/diamond sawing wire based on machine vision. In Lam ADKT, Prior SD, Meen TH, editors, Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 484-486. (Proceedings of 4th IEEE International Conference on Applied System Innovation 2018, ICASI 2018). doi: 10.1109/ICASI.2018.8394291

Online surface characterization of Ni/diamond sawing wire based on machine vision

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this