Novel modeless predictive current control for three-phase AC/DC converter

Yen Shin Lai; Cheng Kai Lin; Fu Pao Chuang; Jen Te Yu

doi:10.1109/ICIT.2016.7474946

Novel modeless predictive current control for three-phase AC/DC converter

Yen Shin Lai
, Cheng Kai Lin
, Fu Pao Chuang
, Jen Te Yu

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Scopus citations

Abstract

The purpose of this paper is to present a new predictive current control method for three-phase AC/DC converters. The special features of the proposed predictive current control method include no need of converter model in prior and reduction of calculation time required for control. Since the proposed control method is modeless predictive control, the parameter variation will not affect the control performance as compared to model-based control approaches. Both simulation and experimental results will be presented to confirm the effectiveness of the proposed modeless predictive current control method. Experimental results are derived from a DSP-based three-phase AC/DC converter with the following specifications: the output voltage = 380 V, input voltage = 220 V/AC, and output power = 1000 W. The measured harmonics results are shown to meet IEC61000-3-2 Class A standard.

Original language	English
Title of host publication	Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1318-1324
Number of pages	7
ISBN (Electronic)	9781467380751
DOIs	https://doi.org/10.1109/ICIT.2016.7474946
State	Published - 19 May 2016
Event	IEEE International Conference on Industrial Technology, ICIT 2016 - Taipei, Taiwan Duration: 14 Mar 2016 → 17 Mar 2016

Publication series

Name	Proceedings of the IEEE International Conference on Industrial Technology
Volume	2016-May

Conference

Conference	IEEE International Conference on Industrial Technology, ICIT 2016
Country/Territory	Taiwan
City	Taipei
Period	14/03/16 → 17/03/16

Bibliographical note

Publisher Copyright:
© 2016 IEEE.

Keywords

AC/DC converter
predictive current control
pulse-width modualtion

Access to Document

10.1109/ICIT.2016.7474946

Cite this

Lai, Y. S., Lin, C. K., Chuang, F. P., & Yu, J. T. (2016). Novel modeless predictive current control for three-phase AC/DC converter. In Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016 (pp. 1318-1324). Article 7474946 (Proceedings of the IEEE International Conference on Industrial Technology; Vol. 2016-May). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICIT.2016.7474946

Lai, Yen Shin ; Lin, Cheng Kai ; Chuang, Fu Pao et al. / Novel modeless predictive current control for three-phase AC/DC converter. Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 1318-1324 (Proceedings of the IEEE International Conference on Industrial Technology).

@inproceedings{8e8d98deec964855b829a88d90cdf397,

title = "Novel modeless predictive current control for three-phase AC/DC converter",

abstract = "The purpose of this paper is to present a new predictive current control method for three-phase AC/DC converters. The special features of the proposed predictive current control method include no need of converter model in prior and reduction of calculation time required for control. Since the proposed control method is modeless predictive control, the parameter variation will not affect the control performance as compared to model-based control approaches. Both simulation and experimental results will be presented to confirm the effectiveness of the proposed modeless predictive current control method. Experimental results are derived from a DSP-based three-phase AC/DC converter with the following specifications: the output voltage = 380 V, input voltage = 220 V/AC, and output power = 1000 W. The measured harmonics results are shown to meet IEC61000-3-2 Class A standard.",

keywords = "AC/DC converter, predictive current control, pulse-width modualtion",

author = "Lai, \{Yen Shin\} and Lin, \{Cheng Kai\} and Chuang, \{Fu Pao\} and Yu, \{Jen Te\}",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; IEEE International Conference on Industrial Technology, ICIT 2016 ; Conference date: 14-03-2016 Through 17-03-2016",

year = "2016",

month = may,

day = "19",

doi = "10.1109/ICIT.2016.7474946",

language = "???core.languages.en\_GB???",

series = "Proceedings of the IEEE International Conference on Industrial Technology",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1318--1324",

booktitle = "Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016",

}

Lai, YS, Lin, CK, Chuang, FP & Yu, JT 2016, Novel modeless predictive current control for three-phase AC/DC converter. in Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016., 7474946, Proceedings of the IEEE International Conference on Industrial Technology, vol. 2016-May, Institute of Electrical and Electronics Engineers Inc., pp. 1318-1324, IEEE International Conference on Industrial Technology, ICIT 2016, Taipei, Taiwan, 14/03/16. https://doi.org/10.1109/ICIT.2016.7474946

Novel modeless predictive current control for three-phase AC/DC converter. / Lai, Yen Shin; Lin, Cheng Kai; Chuang, Fu Pao et al.
Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc., 2016. p. 1318-1324 7474946 (Proceedings of the IEEE International Conference on Industrial Technology; Vol. 2016-May).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Novel modeless predictive current control for three-phase AC/DC converter

AU - Lai, Yen Shin

AU - Lin, Cheng Kai

AU - Chuang, Fu Pao

AU - Yu, Jen Te

PY - 2016/5/19

Y1 - 2016/5/19

N2 - The purpose of this paper is to present a new predictive current control method for three-phase AC/DC converters. The special features of the proposed predictive current control method include no need of converter model in prior and reduction of calculation time required for control. Since the proposed control method is modeless predictive control, the parameter variation will not affect the control performance as compared to model-based control approaches. Both simulation and experimental results will be presented to confirm the effectiveness of the proposed modeless predictive current control method. Experimental results are derived from a DSP-based three-phase AC/DC converter with the following specifications: the output voltage = 380 V, input voltage = 220 V/AC, and output power = 1000 W. The measured harmonics results are shown to meet IEC61000-3-2 Class A standard.

AB - The purpose of this paper is to present a new predictive current control method for three-phase AC/DC converters. The special features of the proposed predictive current control method include no need of converter model in prior and reduction of calculation time required for control. Since the proposed control method is modeless predictive control, the parameter variation will not affect the control performance as compared to model-based control approaches. Both simulation and experimental results will be presented to confirm the effectiveness of the proposed modeless predictive current control method. Experimental results are derived from a DSP-based three-phase AC/DC converter with the following specifications: the output voltage = 380 V, input voltage = 220 V/AC, and output power = 1000 W. The measured harmonics results are shown to meet IEC61000-3-2 Class A standard.

KW - AC/DC converter

KW - predictive current control

KW - pulse-width modualtion

UR - https://www.scopus.com/pages/publications/84974603022

U2 - 10.1109/ICIT.2016.7474946

DO - 10.1109/ICIT.2016.7474946

M3 - ???researchoutput.researchoutputtypes.contributiontobookanthology.conference???

AN - SCOPUS:84974603022

T3 - Proceedings of the IEEE International Conference on Industrial Technology

SP - 1318

EP - 1324

BT - Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - IEEE International Conference on Industrial Technology, ICIT 2016

Y2 - 14 March 2016 through 17 March 2016

ER -

Lai YS, Lin CK, Chuang FP, Yu JT. Novel modeless predictive current control for three-phase AC/DC converter. In Proceedings - 2016 IEEE International Conference on Industrial Technology, ICIT 2016. Institute of Electrical and Electronics Engineers Inc. 2016. p. 1318-1324. 7474946. (Proceedings of the IEEE International Conference on Industrial Technology). doi: 10.1109/ICIT.2016.7474946

Novel modeless predictive current control for three-phase AC/DC converter

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this