Skip to main navigation Skip to search Skip to main content

Microstructure and dielectric properties of sputtered (Ba 0.3Sr0.7)TiO3 thin films with amorphous interfacial layers

Research output: Contribution to journalArticlepeer-review

5 Scopus citations

Abstract

Crystallization behavior, microstructure and dielectric properties of sputtered (Ba0.3Sr0.7)TiO3thin films have been studied. The crystallization from as-deposited amorphous structure to equilibrium crystalline structure is confirmed as an irreversible, exothermic and first-order transition by differential scanning calorimetry. At a heating rate of 20°C/min, the exothermic peak temperature for crystallization is measured to be 697.3°C. Transmission electron microscopy results reveal layered structures of amorphous and perovskite crystalline phases in the films deposited at temperatures between 450 and 650°C. The amorphous interfacial layer diminishes with increasing substrate temperature and a well-crystallized film is found at 750°C with a dielectric loss of 0.021. Dielectric constant shows an abrupt increase to 187 for the film deposited at 750°C as a result of the fully crystallized structure. The measured dielectric constants at different temperatures are well consistent with those calculated based on the presence of amorphous interfacial layers in the films.

Original languageEnglish
Pages (from-to)5049-5054
Number of pages6
JournalJapanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers
Volume44
Issue number7 A
DOIs
StatePublished - 8 Jul 2005

Keywords

  • Activation energy
  • Amorphous phase
  • Barium strontium titanate
  • Crystallization
  • Sputtering

Fingerprint

Dive into the research topics of 'Microstructure and dielectric properties of sputtered (Ba 0.3Sr0.7)TiO3 thin films with amorphous interfacial layers'. Together they form a unique fingerprint.

Cite this