Skip to main navigation Skip to search Skip to main content

A low-phase-noise ka-band push-push voltage-controlled oscillator using CMOS/glass-integrated passive device technologies

Research output: Contribution to journalArticlepeer-review

2 Scopus citations

Abstract

In this paper, a Ka-band CMOS push-push voltage-controlled oscillator (VCO) integrated into a glass-integrated passive device (GIPD) process is presented. The transformer, λ/4 transmission line, and inductors of the VCO are realized in the GIPD process, achieving superior performances, and therefore improve the phase noise of the VCO. Moreover, the transformer-based VCO is a differential Hartley topology to further reduce the phase noise and chip area. Operating at 1.8 V supply voltage, the VCO core consumes merely 3.8 mW of dc power. The measured phase noise is -109.18 dBc/Hz at 1 MHz offset from the 30.84 GHz oscillation frequency. The push-push VCO also demonstrates a 24.5 dB fundamental rejection, and exhibits an 8.4% tuning range. Compared with recently published CMOS-based VCOs, it is observed that the proposed VCO exhibits excellent performance under low power consumption.

Original languageEnglish
Article number6882943
Pages (from-to)1456-1462
Number of pages7
JournalIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Volume61
Issue number9
DOIs
StatePublished - Sep 2014

Fingerprint

Dive into the research topics of 'A low-phase-noise ka-band push-push voltage-controlled oscillator using CMOS/glass-integrated passive device technologies'. Together they form a unique fingerprint.

Cite this